http://www.anajet.com/blog/2012/printwear-direct-to-garment-pre-treatment-article-by-paul-green/ Defining Digital Apparel Printers Mon, 15 Apr 2013 22:33:37 +0000 hourly 1 http://wordpress.org/?v=3.5.1 http://www.anajet.com/blog/2012/printwear-direct-to-garment-pre-treatment-article-by-paul-green/#comment-1110 jl@anajet.com Mon, 23 Jul 2012 23:40:39 +0000 http://www.anajet.com/blog/?p=1578#comment-1110 Some garment decorators might differ with you on the durability of plastisol versus inkjet/digital garment printer inks. When the plastisol ink doesn’t adhere well, it can fall off the garment in big chunks and it’s not really part of the garment. Water-based inks printed on 100% cotton become part of the fabric, not that this reduces fibrillation on a cheap shirt, but it can produce superior results.

]]> http://www.anajet.com/blog/2012/printwear-direct-to-garment-pre-treatment-article-by-paul-green/#comment-1109 jl@anajet.com Mon, 23 Jul 2012 17:06:06 +0000 http://www.anajet.com/blog/?p=1578#comment-1109 Yes, we have a distributor in the UK. Please follow up directly with the company, their information is listed on our Distributors page. http://www.anajet.com/mpower/distributors/distributors-western_southern_europe/

]]> http://www.anajet.com/blog/2012/printwear-direct-to-garment-pre-treatment-article-by-paul-green/#comment-1106 Issa Sun, 22 Jul 2012 16:04:39 +0000 http://www.anajet.com/blog/?p=1578#comment-1106 Great two machines and a lot of money to make. OK, I’ve got a few qutonises, lets start with can I get the AnaJet in the U.K. (England) and if yes would I have your support with the machines maintenance, as no machine is built without the need for maintenance and my other qutonises are does the machine clog up and do I have to clean it often? And for good print quality what does the resolution print image need to be to get that bright, vibrant colour? And what is the resolution of the AnaJet?

]]> http://www.anajet.com/blog/2012/printwear-direct-to-garment-pre-treatment-article-by-paul-green/#comment-1105 Demir Sun, 22 Jul 2012 14:47:04 +0000 http://www.anajet.com/blog/?p=1578#comment-1105 As a screen prtenir from the mid 80 s I can say the Direct to garments work very well. Plastisol will always be the best for long term durability (it is all plastic). Fibrillation is the main problem, but we’ve just started using the Hanes Tagless 6 oz and they wash and look great even after multiple multiple washes. In reality the ink doesn’t fade its the fibrillation just like some screened shirts do I have seen

]]> http://www.anajet.com/blog/2012/printwear-direct-to-garment-pre-treatment-article-by-paul-green/#comment-1099 [Anajet] MP5 issues continue - T-Shirt Forums Thu, 19 Jul 2012 18:13:17 +0000 http://www.anajet.com/blog/?p=1578#comment-1099 [...] through it sounds like a pretreatment issue. check out this article i wrote on pretreating. Printwear Direct to Garment Pre-Treatment Article by Paul Green | Blog | Defining Digital Apparel Pr… also, your pictures do not display? it just sounds like you need a little help, anything i can do [...]

]]> http://www.anajet.com/blog/2012/printwear-direct-to-garment-pre-treatment-article-by-paul-green/#comment-1096 Yusuf Zarma Wed, 18 Jul 2012 12:14:35 +0000 http://www.anajet.com/blog/?p=1578#comment-1096 u have done well. i really want to try it.i want to buy the printer and also want to be a distributor.

]]>